磁浮交通试验线压力管道直线度的测量方法研究及应用     

韩冰  刘成龙  杨雪峰 《测绘通报》2019,(6):126-130,135

目前，国内外对于磁浮交通真空压力管道直线度测量问题的研究较少。本文结合西南交通大学在建的真空磁浮高速列车试验装置，提出了一种真空压力管道直线度测量方法。该方法在管道内建立高精度三维控制网，依据三维控制网测量采用圆曲线拟合方法确定各节管道的圆心坐标，并采用直线拟合方法分析整个管道的直线度。最后依据上述方法编制程序对实测数据进行了处理分析，验证了方法的可行性和正确性，可为今后真空磁浮压力管道的建设提供技术参考。  相似文献   

New graphical methods for estimating aquifer hydraulic parameters using pumping tests with exponentially decreasing rates     

Chao Zhuang  Zhifang Zhou  Hongbin Zhan  Jinguo Wang  Yabing Li  Zhi Dou 《水文研究》2019,33(17):2314-2322

Actual pumping tests may involve continuously decreasing rates over a certain period of time, and the hydraulic conductivity (K) and specific storage (S_s) of the tested confined aquifer cannot be interpreted from the classical constant‐rate test model. In this study, we revisit the aquifer drawdown characteristics of a pumping test with an exponentially decreasing rate using the dimensionless analytical solution for such a variable‐rate model. The drawdown may decrease with time for a short period of time at intermediate pumping times for such pumping tests. A larger ratio of initial to final pumping rate and a smaller radial distance of the observation well will enhance the decreasing feature. A larger decay constant results in an earlier decrease, but it weakens the extent of such a decrease. Based on the proposed dimensionless transformation, we have proposed two graphical methods for estimating K and S_s of the tested aquifer. The first is a new type curve method that does not employ the well function as commonly done in standard type curve analysis. Another is a new analytic method that takes advantage of the decreasing features of aquifer drawdown during the intermediate pumping stage. We have demonstrated the applicability and robustness of the two new graphical methods for aquifer characterization through a synthetic pumping test.  相似文献   

Revised runoff curve number for runoff prediction in the Loess Plateau of China     

Wenhai Shi  Ni Wang  Miaomiao Wang  Donghao Li 《水文研究》2021,35(10):e14390

The soil conservation service (now Natural Resources Conservation Service) Curve Number (SCS-CN), one of the most commonly used methods for surface runoff prediction. The runoff calculated by this method was very sensitive to CN values. In this study, CN values were calculated by both arithmetic mean (CN_C) and least square fit method (CN_F) using observed rainfall-runoff data from 43 sites in the Loess Plateau region, which are considerably different from the CN₂ values obtained from the USDA-SCS handbook table (CN_T). The results showed that using CN_C instead of CN_T for each watershed produce little improvement, while replacing CN_T with CN_F improves the performance of the original SCS-CN method, but still performs poorly in most study sites. This is mainly due to the SCS-CN method using a constant CN value and discounting of the temporal variation in rainfall-runoff process. Therefore, three factors—soil moisture, rainfall depth and intensity—affecting the surface runoff variability are considered to reflect the variation of CN in each watershed, and a new CN value was developed. The reliability of the proposed method was tested with data from 38 watersheds, and then applied to the remaining five typical watersheds using the optimized parameters. The results indicated that the proposed method, which boosted the model efficiencies to 81.83% and 74.23% during calibration and validation cases, respectively, performed better than the original SCS-CN and the Shi and Wang (2020b) method, a modified SCS-CN method based on tabulated CN value. Thus, the proposed method incorporating the influence of the temporal variability of soil moisture, rainfall depth, and intensity factors suggests an accurate runoff prediction for general applications under different hydrological and climatic conditions on the Loess Plateau region.  相似文献   

Predicting the dependency of a degree of saturation on void ratio and suction using effective stress principle for unsaturated soils     

David Mašín 《国际地质力学数值与分析法杂志》2010,34(1):73-90

The paper presents an approach to predicting variation of a degree of saturation in unsaturated soils with void ratio and suction. The approach is based on the effective stress principle for unsaturated soils and several underlying assumptions. It focuses on the main drying and wetting processes and does not incorporate the effects of hydraulic hysteresis. It leads to the dependency of water retention curve (WRC) on void ratio, which does not require any material parameters apart from the parameters specifying WRC for the reference void ratio. Its validity is demonstrated by comparing predictions with the experimental data on four different soils taken over from the literature. Good correlation between the measured and predicted behaviour indirectly supports applicability of the effective stress principle for unsaturated soils. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Effect of bed surface roughness on longitudinal dispersion in artificial open channels     

Marcus Schulz  Jan Priegnitz  Jörg Klasmeier  Stefan Heller  Stefan Meinecke  Michael Feibicke 《水文研究》2012,26(2):272-280

In several empirical and modelling studies on river hydraulics, dispersion was negatively correlated to surface roughness. In this study, it was aimed to investigate the influence of surface roughness on longitudinal dispersion under controlled conditions. In artificial flow channels with a length of 104 m, tracer experiments with variations in channel bed material were performed. By use of measured tracer breakthrough curves, average flow velocity, mean longitudinal dispersion, and mean longitudinal dispersivity were calculated. Longitudinal dispersion coefficients ranged from 0·018 m² s^?1 in channels with smooth bed surface up to 0·209 m² s^?1 in channels with coarse gravel as bed material. Longitudinal dispersion was linearly related to mean flow velocity. Accordingly, longitudinal dispersivities ranged between 0·152 ± 0·017 m in channels with smooth bed surface and 0·584 ± 0·015 m in identical channels with a coarse gravel substrate. Grain size and surface roughness of the channel bed were found to correlate positively to longitudinal dispersion. This finding contradicts several existing relations between surface roughness and dispersion. Future studies should include further variation in surface roughness to derive a better‐founded empirical equation forecasting longitudinal dispersion from surface roughness. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

基于Logistic和Gompertz曲线模型拟合的建筑物沉降分析     

冉雍 《测绘与空间地理信息》2016,(2):192-195

重大工程建设一般会有定期的沉降和变形监测,本研究利用具有规律变化的Logistic和Gompertz曲线模型进行拟合,并以某大型发电厂为研究对象,利用近15年的监测数据,建立预测模型并进行精度评估。研究结果表明,若监测数据具有一定程度的稳定性,并对计算时监测数据进行合理取舍,对采取的全区、分区平均值或单一点高度值的检测数据,运用Logistic和Gompertz曲线模型来预测大型建筑物的沉降情况是可行的。  相似文献   

A microscale model for air pollutant dispersion simulation in urban areas: Presentation of the model and performance over a single building   总被引：1，自引：0，他引：1  

Ning Zhang  Yunsong Du  Shiguang Miao 《大气科学进展》2016,33(2):184-192

A microscale air pollutant dispersion model system is developed for emergency response purposes. The model includes a diagnostic wind field model to simulate the wind field and a random-walk air pollutant dispersion model to simulate the pollutant concentration through consideration of the influence of urban buildings. Numerical experiments are designed to evaluate the model's performance, using CEDVAL(Compilation of Experimental Data for Validation of Microscale Dispersion Models) wind tunnel experiment data, including wind fields and air pollutant dispersion around a single building. The results show that the wind model can reproduce the vortexes triggered by urban buildings and the dispersion model simulates the pollutant concentration around buildings well. Typically, the simulation errors come from the determination of the key zones around a building or building cluster. This model has the potential for multiple applications; for example, the prediction of air pollutant dispersion and the evaluation of environmental impacts in emergency situations; urban planning scenarios;and the assessment of microscale air quality in urban areas.  相似文献   

采用弯曲进行道路化简冲突避免的方法   总被引：1，自引：1，他引：0  

何海威  钱海忠  王骁  胡慧明  陈竞男 《测绘学报》2016,45(3):354-361

针对道路化简后可能导致要素间空间关系前后不一致的问题,提出了一种采用弯曲进行道路化简冲突避免的方法。首先,以弯曲为单元分析道路化简前后弯曲的形态变化规律,对化简过程产生的要素间空间冲突类型进行了归纳和总结;其次,基于道路弯曲与要素之间的空间关系,提出了相应的冲突判别规则;最后,利用弯曲化简的可控性和弯曲组的间接化简策略实现对化简冲突的避免。试验表明,该方法能有效地识别和避免道路化简产生的空间冲突,确保化简前后道路与其他要素空间关系的一致性。  相似文献   

一种迭代法的圆曲线拟合方法     

陈明晶  方源敏  马波  陈杰 《测绘科学》2016,41(5):133-136

针对在实际测量工作中量测圆心坐标及半径时存在的问题,该文基于迭代法的思想,推导了一种圆曲线拟合的方法,并用实例数据进行了检验。结果显示,该方法在离散点均匀采集或非均匀采集的情况下均具有良好的拟合效果,与目前在圆曲线拟合方法中普遍采用的最小二乘法相比,具有同样高的拟合精度,验证了该拟合方法的正确性与可行性。  相似文献   

一种曲线拟合圆心坐标算法及精度分析     

田镇  杨志强  石震  党永超  马骥 《测绘科学》2016,41(11):31-34,55

针对在工程应用中,经常需要根据某些圆形物体上的离散点求取其圆心坐标,而采用何种算法简单易行,其精度又与哪些因素有关的相关研究较少的问题,该文提出一种利用曲线拟合求取圆心坐标的简洁算法,并编程实现。然后采用模拟仿真结合统计分析的方法评估了该算法在不同条件下的拟合精度,得出测点误差越大,拟合精度越低;测点个数越多,分布越均匀,拟合精度越高;圆半径对拟合精度影响甚小等结论。在某工程项目中使用该算法得到的结果精度较高,验证了其有效可行,且与采用其他方法得到的坐标值较为接近,说明了该算法的可靠性高。  相似文献